- SPI = serial peripheral interface
- SFP = small form factor pluggable module
- MDIO = management data input/output (optional)
- XFP = 10 Gigabit Small Form Factor Pluggable module
- XFI = 10G Ethernet XFI
- SFP+ = 8.5- and 10-Gbps small form factor pluggable module
- SFI = SFP+ high-speed serial electrical interface
The transceiver module in Stratix V (GX, GS, and GT), Stratix IV (GX and GT), Cyclone IV GX (F23 and larger packages), Arria II GX, Stratix II GX, and Arria GX devices meet all IEEE 802.3 specifications, including jitter generation under 0.35 unit interval (UI) without pre-emphasis and jitter tolerance of more than 0.60 UI, peak-to-peak total. The transceiver module matches the IEEE 802.3 sinusoidal jitter-tolerance mask requirement. The 3.125 Gbps x4 channel unidirectional data transfer rate for 10GbE complies with the IEEE 802.3 XAUI definitions for linking physical-layer devices with upper-layer devices.
The XAUI transceiver module provides a 156.25 MHz input reference clock and parallel interface along with a 4-channel clock data recovery (CDR) receiver and 4-channel transceiver arrays, an AC-coupled differential interface, and differential pseudo current mode logic (PCML) drivers. The transceiver module also incorporates a 1:16 serializer/deserializer (SERDES) with a 16:20 gearbox, 8B/10B coding, and lane alignment. The transceivers offer up to 500 percent pre-emphasis and up to 17-dB equalization to compensate high-frequency losses.
Intel FPGA offers an array of silicon-proven 10GbE MAC cores with built-in support for the XGMII and XAUI, XSBI (64B/66B PCS layer) interfaces, and OC-192. Built-in support is also provided for flow control, MII management, address-based filtering, and statistics counters for RMON and MIB. The 10GbE MAC layer and reconciliation sublayer core is compliant with the IEEE 802.3 specification and supports multiple custom switch fabric enhancements to interface Intel FPGA's devices with 3.125 Gbps serial transceivers directly to 10GbE switch devices.
Intel FPGA is the first FPGA vendor to deliver a multi-gigabit and 10GbE PCI Express host adapter card development kit. The host bus adapter, called the Stratix IV GX FPGA Development Kit, is built with Intel FPGA's Stratix IV GX EP4SGX230 FPGA, with up to 36 multi-gigabit transceivers accelerating the convergence of network and storage applications using 10GbE technology.
Ethernet is the most popular LAN technology expanding into the metro and WAN networks, and it is the dominant wired networking protocol. It has evolved from a 1 MHz shared medium signal running on coaxial cable to the present availability of numerous variants operating as fast as 10 Gbps. Intel FPGA's 10GbE solutions provide top-of-the-line performance for leading-edge network development.