Intel® Arria® 10 and Intel® Cyclone® 10 GX Avalon Streaming Hard IP for PCIe* Design Example User Guide

ID 683065
Date 1/13/2022
Public

1. Quick Start Guide

Updated for:
Intel® Quartus® Prime Design Suite 17.1

The Intel® Arria® 10 or Intel® Cyclone® 10 GX Hard IP for PCI Express* IP core includes a programmed I/O (PIO) design example to help you understand usage. The PIO example transfers data from a host processor to a target device. It is appropriate for low-bandwidth applications. The design example includes an Avalon-ST to Avalon-MM Bridge. This component translates the TLPs received on the PCIe* link to Avalon-MM memory reads and writes to the on-chip memory.

This design example automatically creates the files necessary to simulate and compile in the Quartus® Prime software. You can download the compiled design to the Intel® Arria® 10 GX FPGA Development Kit. The design examples cover a wide range of parameters. However, the automatically generated design examples do not cover all possible parameterizations of the PCIe IP Core. If you select an unsupported parameter set, generations fails and provides an error message.

In addition, many static design examples for simulation are only available in the <install_dir>/ip/altera/altera_pcie/altera_pcie_a10_ed/example_design/a10 and <install_dir>/ip/altera/altera_pcie/altera_pcie_a10_ed/example_design/c10 directories.

Figure 1. Development Steps for the Design Example