Intel® Server Board D50TNP Family BIOS and Firmware Update Package for UEFI

19780
9/15/2022

Introduction

This download record contains the BIOS and firmware update package for the Intel® Server Board D50TNP Family for UEFI (R01.01.0006).

Available Downloads

  • Size: 27.3 MB
  • SHA1: 16BAE545C22E6A1CCF87731DA49A029CBAE65E40

Detailed Description

Overview

This download record contains the BIOS and firmware update package for the Intel® Server Board D50TNP Family and appropriate Intel® Server System D50TNP Family —for use with Intel's technology-embedded Unified Extensible Firmware Interface (UEFI) shell.

Purpose

UEFI System Update Package (SUP) Installation and Operation Instructions

Intel highly recommends reading the Readme and Update Instructions.txt in its entirety before performing the system update. Verifying that your system meets the documented requirements will ensure a successful update and provide the most reliable system functionality after the update has been completed.

Released - September 5, 2022

********************************************************************************

This update package includes the following production-level system software updates and update utilities:

  • System BIOS: R01.01.0006
  • ME Firmware: 04.04.04.202
  • BMC Firmware: 2.89.7e3b728b
  • FRUSDR: 0.42
  • Pmem: 2.2.0.1553
  • CPLD: v3P9
  • sysfwupdt.efi - Version 16.0.5

Supported products

Intel® Server Board D50TNP Family

Contact Intel for pre-production hardware support requirements

Important notes

• This is a production FW package. All updates provided in this package are installed using the embedded UEFI operating environment only.

• Do not modify any of the script files. The scripts as written will provide the most reliable update experience.

• Added the new function to check the FW version on the current system, which can make sure whether System BIOS, BMC Firmware, CPLD, FRU&SDR, or PMem data need to be re-installed after the initial update has been performed. The package does include standalone script files that can be run individually.

These files include:

• UpdBIOS_TNP.nsh

• UpdD50TNP.nsh

• UpdCPLD_TNP.nsh

• tnpFwUpdateBMC.nsh

• UpdatePmemFW.nsh

Do NOT use these files until after the system has been updated initially using the startup.nsh file.

System software requirements

To update the system software stack to the versions included in this update package, the system software stack currently installed on the target server system MUST meet the following, or else the update may fail:

  • System BIOS: R01.01.0005 or later
  • ME Firmware: 04.04.04.62
  • BMC Firmware: 2.88.e5f45b9c or later
  • FRUSDR: 0.40 or later
  • CPLDL: v3P5 or later
  • Pmem: 2.2.0.1553

Important information for the update procedure

As part of the firmware update process, the system will be rebooted 2 times. On the first reboot, the screen will be off for around 18 minutes. On the second reboot, the screen will be off for around 4 minutes.

During all the firmware update process including the two reboots:

Do NOT remove Power Cable!

Do NOT press Power Button!

Do NOT removethe USB flash!

OR ELSE, you may render your system inoperable!

More information can be found on the Readme and Update Instructions.txt

Product and Performance Information

1

Intel is in the process of removing non-inclusive language from our current documentation, user interfaces, and code. Please note that retroactive changes are not always possible, and some non-inclusive language may remain in older documentation, user interfaces, and code.