Setting Automatic Send or Receive in Outlook* for Intel® Smart Connect Technology

Documentation

Compatibility

000005981

11/10/2017

When using Outlook* as your e-mail client with Intel® Smart Connect Technology, you might need to adjust a send/receive setting. Better results are seen when setting the automatic cycle to a lower value, such as five minutes, or even as low as one minute.

Follow these instructions to change the time to check for new messages in Outlook* 2010 or Outlook 2007.

For Outlook 2010:

  1. Click File > Options.
  2. In the Options window, click Advanced, scroll down, and click the Send/Receive button.
  3. Under the Setting for group All Accounts section, select the Include this group in send/receive (F9) check box and select the Schedule an automatic send/receive every "XX" minutes check box. Use the up and down arrows to set the desired minutes.

For Outlook 2007:

  1. Click Tools > Options.
  2. Click the Mail Setup tab. Select the check box Send immediately when connected, and then click Send/Receive button.
  3. Make sure the group All Accounts is selected and select the check box Schedule an automatic send/receive every. Change the value for minutes as desired.