Article ID: 000037122 Content Type: Install & Setup Last Reviewed: 07/12/2021

I am not able perform Windows® 10 updates on Intel NUC5PGYH due to insufficient space on eMMC memory [32 GB]

Environment

Intel® NUC kit NUC5PGYH Storage: 2.5" HDD/SSD   Intel® NUC Kit NUC5PGYH comes with 32 GB eMMC storage with Pre-installed Windows® 10 operating system

Operating System

windows10family

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Summary

This article provides steps to transfer Windows 10 Operating system from eMMC to SSD/HDD

Description

Windows® 10 updates and patches are not installed on Intel® NUC Kit NUC5PGYH due to insufficient space.

Resolution

We need to clone Windows 10 eMMC data to a SSD/HDD using Macrium* software

1) Download Macrium software

2) Launch Macrium software and select Disk which needs to cloned(eMMC)

3) Select "Clone this disk"

4) In the wizard that opens Click "Select a disk to clone to…" option.

5) Choose the 2.5" SSD/HDD

6) Review Settings/Partitions and click Finish

 

Check for Cloning status:-

1) Reboot NUC, Press F2 to Enter BIOS

2) Disable eMMC in BIOS

3) Select SSD/HDD as Primary Boot device

 

If the NUC boots with SSD/HDD Operating system image, You have successfully Cloned the Windows 10 image.

 

Ensure to delete/format Partition from eMMC memory

Additional information

Once the direct disk cloning process is completed, there will be 2 instances of Windows® 10 operating system. The Windows 10 image from eMMC has to be removed manually by formatting the eMMC storage.

Product and Performance Information

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.