Article ID: 000074153 Content Type: Troubleshooting Last Reviewed: 12/14/2020

Why does configuration fail when Phase 1 and Phase 2 configuration files come from different version of the Intel® Quartus® Prime software?

Environment

  • Quartus® II Subscription Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    In the context of HPS Boot First mode, the initial configuration of HPS EMIF I/O and loading of HPS FSBL is called "Phase 1 configuration". The subsequent configuration of FPGA core and periphery by HPS is called "Phase 2 configuration".

    The Phase 1 and Phase 2 configuration files must be generated from the same Intel® Quartus® Prime version, including patches installed if applicable, otherwise configuration of Intel® Stratix® 10 devices with HPS may fail.

    Resolution

    The description has been added to the  Intel® Stratix® 10 Hard Processor System Technical Reference Manual.

    Related Products

    This article applies to 2 products

    Intel® Stratix® 10 TX FPGA
    Intel® Stratix® 10 SX SoC FPGA