Article ID: 000074351 Content Type: Troubleshooting Last Reviewed: 03/08/2022

Why does Intel® Quartus® Prime Programmer fail to program an Intel® MAX® 10 device with JTAG Secure mode enabled in a device chain?

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    You will observe Intel® Quartus® Prime Programmer failure when you have an Intel® MAX® 10 device with JTAG Secure mode enabled in multiple device JTAG chain. 

    Resolution

    To work around this issue, perform Intel® Quartus® Prime Programmer programming separately between the Intel® MAX® 10 device with JTAG Secure mode enabled and the rest of the devices in the JTAG chain.

    - When you are programming an Intel® MAX® 10 device with JTAG Secure mode enabled,  you need to bypass the rest of the devices in the JTAG chain

    - When you are programming the rest of the devices in the JTAG chain then you need to bypass the Intel® MAX® 10 devices with JTAG Secure mode enabled.

    This problem is fixed starting with the Intel® Quartus® Prime Software version 21.1.

    Related Products

    This article applies to 1 products

    Intel® MAX® 10 FPGAs