Description
Notes (1) and (2) for Table 29 are incorrect. Below are the corrections to these notes:
(1) Pin 1 is tied to GND. Pins 2, and 3 are no connects.
(2) Pin 1 is tied to 5-V. Pins 5, and 7 are tied to 3.3-V. Pins 3, 15, 17, and 19 are no connects. Pins 2, 4, 6, 8, 10, 12, 14, 16, 18, and 20 are tied to ground.
In Figure 8, Pin 6 of JP24 is not connected to pin D31 on the chip. It is connected to pin D30.