Article ID: 000076114 Content Type: Error Messages Last Reviewed: 03/16/2023

Error (14498): Arria 10 devices have specific voltage requirements for VCCR_GXB/VCCT_GXB Voltage pins.

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

You might see the Quartus® II software Fitter error above when compiling for Intel® Arria® 10 devices.

Resolution

To work around this problem, refer to the Power Supply Sharing Guidelines section of the Intel® Arria® 10 Pin Connection Guidelines (PDF) document and verify the following:

  • The intended transceiver data rate does not exceed the maximum data rate supported for the selected Intel Arria 10 device transceiver speed grade.
  • The user assigned transceiver VCCR_GXB and VCCT_GXB supplies do not exceed the maximum voltage supported for the selected Intel Arria 10 device.
  • The transceiver data rate does not exceed the maximum data rate supported of the user-assigned link type (chip-to-chip or backplane) for the selected Intel Arria 10 device.

If any of the above are violated, update your Quartus II project assignments and/or select a new Intel Arria 10 device with a faster transceiver speed grade.

Related Products

This article applies to 3 products

Intel® Arria® 10 GT FPGA
Intel® Arria® 10 GX FPGA
Intel® Arria® 10 SX SoC FPGA