Article ID: 000077604 Content Type: Troubleshooting Last Reviewed: 04/14/2023

Why does the Quartus® II software not show 3.3 V as a supported VCCPGM voltage for Cyclone® V devices?

Environment

  • Quartus® II Software
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Cyclone® V devices support 3.3 V for VCCPGM. However, the .pin file generated by the Quartus® II software does not support this.

    Currently, the .pin file only states 1.8 V, 2.5 V, or 3.0 V as supported voltages.

    This is only a reporting problem and does not affect device functionality.

    Resolution

    The supported voltages for the VCCPGM pin have been updated in the Quartus II software v13.

    Related Products

    This article applies to 6 products

    Cyclone® V SX SoC FPGA
    Cyclone® V GT FPGA
    Cyclone® V GX FPGA
    Cyclone® V ST SoC FPGA
    Cyclone® V E FPGA
    Cyclone® V SE SoC FPGA