Article ID: 000078422 Content Type: Troubleshooting Last Reviewed: 09/03/2012

Is there an internal weak pull-up resistor on Cyclone II device dedicated clock input pins during power-up and configuration?

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

Yes, the Cyclone® II device dedicated clock input pins support the internal weak pull-up resistor on the dedicated clock input pins during power up and configuration. Cyclone II devices do not support the programmable pull-up resistor on dedicated clock input pins in user mode.

Related Products

This article applies to 1 products

Cyclone® II FPGA