Article ID: 000079341 Content Type: Troubleshooting Last Reviewed: 09/11/2012

Should the checksum of my programming file differ if I have made design file changes in the Quartus® II software version 2.2 SP2?

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description Yes, the checksum values should be different if any design changes were made. However, some design changes in Quartus II 2.2 SP2 will not force an update to the checksum. This issue has been corrected in Quartus II software version 3.0 and later.

Related Products

This article applies to 1 products

Acex® 1K