Article ID: 000079704 Content Type: Troubleshooting Last Reviewed: 09/11/2012

Why does the Quartus® II 4.0 Programmer fail to successfully configure my ACEX® 1K device via JTAG when using a download cable?

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description A problem in the Quartus II 4.0 full and web edition software prevents successful JTAG-based configuration of ACEX 1K devices. This problem only affects the Programmer and does not affect configuration file (SOF) generation. All Altera download cables including the USB Blaster, MasterBlaster, ByteBlaster II, and ByteBlasterMV are affected.

Software patch 0.18 for the Quartus II software version 4.0 resolves this problem. To request this patch, please contact Altera Customer Applications . This fix will be included in Quartus II 4.0 Service Pack 1.

Related Products

This article applies to 1 products

Acex® 1K