You may see CMU PLL loose lock in bonded configuration before busy signal is de-asserted in Arria® II GX/GZ, Stratix® IV GX/GT and Hardcopy® GX devices if CMU PLL is powered down before ALTGX_RECONFIG busy signal is de-asserted during offset cancellation process. CMU PLL is powered down for internal voltage calibration in bonded configuration.
Users who use only rising edge of pll_locked signal to trigger tx_digitalreset will be affected.
The workaround is to wait for ALTGX_RECONFIG busy signal to de-assert before monitoring pll_locked.