Article ID: 000085040 Content Type: Troubleshooting Last Reviewed: 11/16/2012

What are the correct switch settings for SW1 on the Cyclone IV GX development kit?

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

The Cyclone IV GX FPGA Development Kit User Guide (PDF) and the Cyclone IV GX FPGA Development Kit Reference Manual (PDF) for the Cyclone® IV GX development kit have conflicting information regarding the ON and OFF settings for switch designated SW1.

The correct settings for SW1 are in the User Guide, where ON = 0 and OFF =1. The Reference Manual version 1.0 depicts this incorrectly.

Related Products

This article applies to 1 products

Cyclone® IV GX FPGA