Article ID: 000092461 Content Type: Troubleshooting Last Reviewed: 06/20/2023

Are there any known problems in the All Package Pins compilation report in the Intel® Quartus® Prime Pro Edition Software when targeting Intel Agilex® 7 devices?

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Yes, when you compile a design targeting Intel Agilex® 7 devices using Intel® Quartus® Prime Pro Edition Software version 22.3 and earlier, the following issues will be seen in the All Package Pins compilation report :

    1. The I/O direction of PWRMGT_SCL and PWRMGT_SDA are displayed as "output".  However, this I/O direction is incorrect. They should be displayed as "bidir".

    2. The pin name of the SDM pin assigned to HPS_COLD_nRESET is displayed as "HPS_COLD_RESET," and the I/O direction of this pin is displayed as "output."  However, this information is incorrect.  The pin name should be displayed as "HPS_COLD_nRESET," and the I/O direction should be "bidir".

     

     

    Resolution

    These problems are scheduled to be fixed in a future version of the Intel® Quartus® Prime Pro Edition Software.

    Related Products

    This article applies to 1 products

    Intel Agilex® 7 FPGAs and SoC FPGAs