Select Flash Device Dialog Box

You open this dialog box by clicking Select Flash Device in the Programmer.

Allows you to add flash devices to the Programmer.

  • Device family—Displays flash device families available for configuration, programming, or bypassing in a JTAG chain. The Device name list displays the available devices from the selected device family. Turning on the check box next to a device family name turns on the check boxes of all the available devices in that family. When you turn on the check box next to a device, you indicate that you want to add that device to the Device list of the programming list in the Programmer.
  • Device name—Displays available devices for the device family selected in the Device family list.