Intel® Quartus® Prime Pro Edition User Guide: Programmer

ID 683039
Date 4/03/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.2.1.2. Secondary Programming Files (Programming File Generator)

After generating primary device programming files, you can generate the following secondary device programming files with the Programming File Generator for alternative device configuration modes:
Table 3.  Programming File Generator Output File Types
Programming File Type Extension Description
Hexadecimal ( Intel® -Format) Output File for SRAM .hexout An ASCII text file in Intel® hexadecimal format that contains configuration data for programming a parallel data source, such as a configuration device or a mass storage device. The parallel data source in turn configures an SRAM-based Intel device.
JTAG Indirect Configuration File .jic Proprietary Intel® FPGA file type that stores serial flash programming data for programming via Intel® FPGA JTAG pins. This method only supports Active Serial configuration. Before programming the flash, the Programmer first configures the FPGA with the Serial Flash Helper Design.
Map File .map A text file containing the byte addresses of pages and data stored in the memory of a configuration device for
Programmer Object File .pof A binary file used by the Programmer to program a flash memory device via active serial header, or to program a flash memory device via the Parallel Flash Loader Intel FPGA IP.
Raw Binary File .rbf

Configuration bitstream file for use with a third-party data source, partial reconfiguration, or HPS data source. Supports Passive Serial (PS) and Avalon® -Streaming (AVST) modes.

Raw Binary File for CvP Core Configuration .rbf A binary file that containing logic that is programmed by configuration (CRAM) for CvP phase 2. The core bitstream is in .rbf format.
Raw Binary File for HPS Core Configuration .rbf A binary file that containing logic that is programmed by configuration (CRAM) for HPS configuration phase 2. The core bitstream is in .rbf format.
Raw Programming Data File .rpd Stores data for configuration with third-party programming hardware. You generate Raw Programming Data Files from a .pof or .sof. The .rpd file is a subset of a .pof or .jic that includes only device-specific binary programming data for Active Serial configuration scheme with EPCS or EPCQ serial configuration devices and remote system update.
Tabular Text File .ttf A TTF contains the decimal equivalent of a Raw Binary File (.rbf).