Intel® Quartus® Prime Pro Edition User Guide: Power Analysis and Optimization

ID 683174
Date 12/04/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.6.1. Running the Power Analyzer from the Command–Line

The executable to run the Power Analyzer is quartus_pow. For a complete listing of all command–line options supported by quartus_pow, type the following command at a system command prompt:
quartus_pow --help
or
quartus_sh --qhelp

The following lists the examples of using the quartus_pow executable. Type the command listed in the following section at a system command prompt:

Note: These examples assume that operations are performed on Intel® Quartus® Prime project called sample.
  • To customize the name of the generated EPE File:
    quartus_pow sample --output_epe=sample.csv ←
  • To customize the name of the generated Power and Thermal Calculator file:
    quartus_pow sample --output_ptc=sample.qptc  ←
  • To instruct the Power Analyzer to use a .vcd as input (sample.vcd):
    quartus_pow sample --input_vcd=sample.vcd ←
  • To instruct the Power Analyzer to use two .vcd files as input files (sample1.vcd and sample2.vcd), perform glitch filtering on the .vcd and use a default input I/O toggle rate of 10,000 transitions per second:
    quartus_pow sample --input_vcd=sample1.vcd --input_vcd=sample2.vcd \
    --vcd_filter_glitches=on --\
    default_input_io_toggle_rate=10000transitions/s
  • To instruct the Power Analyzer not to use an input file, specify a default input I/O toggle rate of 60%, with vectorless estimation off, and a default toggle rate of 20% on all remaining signals:
    quartus_pow sample --no_input_file --default_input_io_toggle_rate=60% \
    --use_vectorless_estimation=off --default_toggle_rate=20%
Note: No command–line options are available to specify the information found on the Operating Settings and Conditions and Power Analyzer Settings > Thermal pages. Use the Intel® Quartus® Prime GUI to specify these options.

The quartus_pow executable creates a report file, <revision name> .pow.rpt. You can locate the report file in the main project directory. The report file contains the same information that the Power Analyzer Compilation Report.