Embedded Peripherals IP User Guide

ID 683130
Date 2/16/2024
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
1. Introduction 2. Avalon® -ST Multi-Channel Shared Memory FIFO Core 3. Avalon® -ST Single-Clock and Dual-Clock FIFO Cores 4. Avalon® -ST Serial Peripheral Interface Core 5. SPI Core 6. SPI Agent/JTAG to Avalon® Host Bridge Cores 7. Intel eSPI Agent Core 8. eSPI to LPC Bridge Core 9. Ethernet MDIO Core 10. Intel FPGA 16550 Compatible UART Core 11. UART Core 12. JTAG UART Core 13. Intel FPGA Avalon® Mailbox Core 14. Intel FPGA Avalon® Mutex Core 15. Intel FPGA Avalon® I2C (Host) Core 16. Intel FPGA I2C Agent to Avalon® -MM Host Bridge Core 17. Intel FPGA Avalon® Compact Flash Core 18. EPCS/EPCQA Serial Flash Controller Core 19. Intel FPGA Serial Flash Controller Core 20. Intel FPGA Serial Flash Controller II Core 21. Intel FPGA Generic QUAD SPI Controller Core 22. Intel FPGA Generic QUAD SPI Controller II Core 23. Interval Timer Core 24. Intel FPGA Avalon FIFO Memory Core 25. On-Chip Memory (RAM and ROM) Intel FPGA IP 26. On-Chip Memory II (RAM or ROM) Intel FPGA IP 27. Optrex 16207 LCD Controller Core 28. PIO Core 29. PLL Cores 30. DMA Controller Core 31. Modular Scatter-Gather DMA Core 32. Scatter-Gather DMA Controller Core 33. SDRAM Controller Core 34. Tri-State SDRAM Core 35. Video Sync Generator and Pixel Converter Cores 36. Intel FPGA Interrupt Latency Counter Core 37. Performance Counter Unit Core 38. Vectored Interrupt Controller Core 39. Avalon® -ST Data Pattern Generator and Checker Cores 40. Avalon® -ST Test Pattern Generator and Checker Cores 41. System ID Peripheral Core 42. Avalon® Packets to Transactions Converter Core 43. Avalon® -ST Multiplexer and Demultiplexer Cores 44. Avalon® -ST Bytes to Packets and Packets to Bytes Converter Cores 45. Avalon® -ST Delay Core 46. Avalon® -ST Round Robin Scheduler Core 47. Avalon® -ST Splitter Core 48. Avalon® -MM DDR Memory Half Rate Bridge Core 49. Intel FPGA GMII to RGMII Converter Core 50. Intel FPGA MII to RMII Converter Core 51. HPS GMII to TSE 1000BASE-X/SGMII PCS Bridge Core Intel® FPGA IP 52. Intel FPGA HPS EMAC to Multi-rate PHY GMII Adapter Core 53. Intel FPGA MSI to GIC Generator Core 54. Cache Coherency Translator Intel® FPGA IP 55. Lightweight UART Core

47.3. Parameters

Table 460.  Configurable Parameters
Parameter Legal Values Default Value Description
Number Of Outputs 1 to 16 2 The number of output interfaces. The value of 1 is supported for some cases of parameterized systems in which no duplicated output is required.
Qualify Valid Out 0 or 1 1 Determines whether the Out_Valid signal is gated or non-gated when backpressure is applied.
Data Width 1–512 8 The width of the data on the Avalon® -ST data interfaces.
Bits Per Symbol 1–512 8 The number of bits per symbol for the input and output interfaces. For example, byte-oriented interfaces have 8-bit symbols.
Use Packets 0 or 1 0 Indicates whether or not packet transfers are supported. Packet support includes the startofpacket, endofpacket, and empty signals.
Use Channel 0 or 1 0 The option to enable or disable the channel signal.
Channel Width 0-8 1 The width of the channel signal on the data interfaces. This parameter is disabled when Use Channel is set to 0.
Max Channels 0-255 1 The maximum number of channels that a data interface can support. This parameter is disabled when Use Channel is set to 0.
Use Error 0 or 1 0 The option to enable or disable the error signal.
Error Width 0–31 1 The width of the error signal on the output interfaces. A value of 0 indicates that the error signal is not used. This parameter is disabled when Use Error is set to 0.
Use packets 0 or 1   Setting this parameter to 1 enables packet support on the Avalon® -ST data interfaces.
Use fill level 0 or 1   Setting this parameter to 1 enables the Avalon® -MM status interface.
Number of almost-full thresholds 0 to 2   The number of almost-full thresholds to enable. Setting this parameter to 1 enables Use almost-full threshold 1. Setting it to 2 enables both Use almost-full threshold 1 and Use almost-full threshold 2.
Number of almost-empty thresholds 0 to 2   The number of almost-empty thresholds to enable. Setting this parameter to 1 enables Use almost-empty threshold 1. Setting it to 2 enables both Use almost-empty threshold 1 and Use almost-empty threshold 2.
Section available threshold 0 to 2 Address Width   Specify the amount of data to be delivered to the output interface. This parameter applies only when packet support is disabled.
Packet buffer mode 0 or 1   Setting this parameter to 1 causes the core to deliver only full packets to the output interface. This parameter applies only when Use packets is set to 1.
Drop on error 0 or 1   Setting this parameter to 1 causes the core to drop packets at the Avalon® -ST data sink interface if the error signal on that interface is asserted. Otherwise, the core accepts the packet and sends it out on the Avalon® -ST data source interface with the same error. This parameter applies only when packet buffer mode is enabled.
Use almost-full threshold 1 0 or 1   This threshold indicates that the FIFO is almost full. It is enabled when the parameter Number of almost-full threshold is set to 1 or 2.
Use almost-full threshold 2 0 or 1   This threshold is an initial indication that the FIFO is getting full. It is enabled when the parameter Number of almost-full threshold is set to 2.
Use almost-empty threshold 1 0 or 1   This threshold indicates that the FIFO is almost empty. It is enabled when the parameter Number of almost-empty threshold is set to 1 or 2.
Use almost-empty threshold 2 0 or 1   This threshold is an initial indication that the FIFO is getting empty. It is enabled when the parameter Number of almost-empty threshold is set to 2.