E-Tile Hard IP Intel® Stratix® 10 Design Examples User Guide: Ethernet, CPRI PHY, and Dynamic Reconfiguration

Download PDF
ID 683578
Date 5/25/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About E-tile Hard IP Design Examples 2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example 3. E-tile CPRI PHY Intel® FPGA IP Design Example 4. E-Tile Dynamic Reconfiguration Design Example 5. E-tile Hard IP Intel® Stratix® 10 Design Examples User Guide Archives
2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example x
2.1. E-Tile Hard IP for Ethernet Intel FPGA IP Quick Start Guide 2.2. 10GE/25GE with Optional RS-FEC Design Examples 2.3. 100GE with Optional RS-FEC Design Example 2.4. Ethernet Toolkit Overview 2.5. Document Revision History for the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example
2.1. E-Tile Hard IP for Ethernet Intel FPGA IP Quick Start Guide x
2.1.1. Directory Structure 2.1.2. Generating the Design 2.1.3. Simulating the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example Testbench 2.1.4. Compiling the Compilation-Only Project 2.1.5. Compiling and Configuring the Design Example in Hardware 2.1.6. Testing the E-Tile Hard IP for Ethernet Intel FPGA IP Hardware Design Example
2.1.3. Simulating the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example Testbench x
2.1.3.1. Fast Sim Model for E-tile Ethernet IP for Intel Stratix 10 FPGA
2.1.6. Testing the E-Tile Hard IP for Ethernet Intel FPGA IP Hardware Design Example x
2.1.6.1. 10GE/25GE Design Example 2.1.6.2. 100GE MAC+PCS with Optional (528,514) RS-FEC or (544,514) RS-FEC and Adaptation Flow Hardware Design Example 2.1.6.3. 100GE PCS Only with Optional (528,514) RS-FEC or (544,514) RS-FEC, and Optional PTP Hardware Design Example
2.2. 10GE/25GE with Optional RS-FEC Design Examples x
2.2.1. Simulation Design Examples 2.2.2. Hardware Design Examples 2.2.3. 10GE/25GE Design Example Interface Signals 2.2.4. 10GE/25GE Design Examples Registers
2.2.1. Simulation Design Examples x
2.2.1.1. Non-PTP 10GE/25GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.2.1.2. PTP 10GE/25GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.2.1.3. 10GE/25GE PCS Only, OTN, or FlexE with Optional RS-FEC Simulation Design Example 2.2.1.4. 10GE/25GE Custom PCS with Optional RS-FEC Simulation Design Example
2.2.2. Hardware Design Examples x
2.2.2.1. 10GE/25GE MAC+PCS with Optional RS-FEC and PTP Hardware Design Example Components 2.2.2.2. 10GE/25GE PCS Only with Optional RS-FEC Hardware Design Example Components 2.2.2.3. 10GE/25GE Custom PCS with Optional RS-FEC Hardware Design Example
2.3. 100GE with Optional RS-FEC Design Example x
2.3.1. Simulation Design Examples 2.3.2. Hardware Design Examples 2.3.3. 100GE MAC+PCS with Optional RS-FEC Design Example Interface Signals 2.3.4. 100GE PCS with Optional RS-FEC Design Example Interface Signals 2.3.5. Multiple 25G Synchronous Ethernet Channels 2.3.6. 100GE MAC+PCS with Optional RS-FEC Design Example Registers 2.3.7. 100GE PCS with Optional RS-FEC Design Example Registers
2.3.1. Simulation Design Examples x
2.3.1.1. Non-PTP E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.3.1.2. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC and PTP Simulation Design Example 2.3.1.3. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE PCS Only with Optional RS-FEC Simulation Design Example 2.3.1.4. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE OTN with Optional RS-FEC Simulation Design Example 2.3.1.5. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE FlexE with Optional RS-FEC Simulation Design Example
2.3.2. Hardware Design Examples x
2.3.2.1. 100GE MAC+PCS with Optional RS-FEC and PMA Adaptation Flow Hardware Design Example Components 2.3.2.2. 100GE MAC+PCS with Optional RS-FEC and PTP Hardware Design Example 2.3.2.3. 100GE PCS with Optional RS-FEC Hardware Design Example Components 2.3.2.4. Ethernet Adaptation Flow for 100G (CAUI-2) PAM4 <---> 100G (CAUI-4) NRZ Dynamic Reconfiguration Design Example
2.4. Ethernet Toolkit Overview x
2.4.1. Features
3. E-tile CPRI PHY Intel® FPGA IP Design Example x
3.1. E-tile CPRI PHY Intel® FPGA IP Quick Start Guide 3.2. E-tile CPRI PHY Design Example Description 3.3. Document Revision History for the E-tile CPRI PHY Intel® FPGA IP Design Example
3.1. E-tile CPRI PHY Intel® FPGA IP Quick Start Guide x
3.1.1. Hardware and Software Requirements 3.1.2. Generating the Design 3.1.3. Directory Structure 3.1.4. Simulating the Design Example Testbench 3.1.5. Compiling the Compilation-Only Project 3.1.6. Compiling and Configuring the Design Example in Hardware 3.1.7. Testing the E-tile CPRI PHY Intel® FPGA IP Hardware Design Example
3.2. E-tile CPRI PHY Design Example Description x
3.2.1. Features 3.2.2. Simulation Design Example 3.2.3. Hardware Design Example 3.2.4. Interface Signals 3.2.5. Design Example Register Map for Reconfiguration
4. E-Tile Dynamic Reconfiguration Design Example x
4.1. Quick Start Guide 4.2. 10G/25G Ethernet Dynamic Reconfiguration Design Examples 4.3. CPRI Dynamic Reconfiguration Design Examples 4.4. 25G Ethernet to CPRI Dynamic Reconfiguration Design Example 4.5. 100G Ethernet Dynamic Reconfiguration Design Example 4.6. Document Revision History for the E-tile Dynamic Reconfiguration Design Example
4.1. Quick Start Guide x
4.1.1. Directory Structure 4.1.2. Generating the Design 4.1.3. Simulating the E-Tile Dynamic Reconfiguration Design Example Testbench 4.1.4. Compiling and Configuring the Design Example in Hardware 4.1.5. Testing the E-tile Dynamic Reconfiguration Hardware Design Example
4.1.2. Generating the Design x
4.1.2.1. Design Example Parameters
4.1.3. Simulating the E-Tile Dynamic Reconfiguration Design Example Testbench x
4.1.3.1. Running the Simulation with Default HEX File 4.1.3.2. Running the Simulation with New HEX File 4.1.3.3. Performing the Link Initialization
4.1.5. Testing the E-tile Dynamic Reconfiguration Hardware Design Example x
4.1.5.1. Running the Design Example in Hardware 4.1.5.2. Power Management Setting for Stratix 10 E-Tile TX Transceiver Signal Integrity Development Kit
4.2. 10G/25G Ethernet Dynamic Reconfiguration Design Examples x
4.2.1. Functional Description 4.2.2. Simulation Design Examples 4.2.3. Hardware Design Examples 4.2.4. 10GE/25GE Design Example Interface Signals 4.2.5. 10GE/25GE Design Examples Registers 4.2.6. Dynamic Reconfiguration Flow for 25GbE PTP FEC to 25GbE PTP Non-FEC
4.2.1. Functional Description x
4.2.1.1. Clocking Scheme
4.2.2. Simulation Design Examples x
4.2.2.1. 10GE/25GE MAC+PCS with RS-FEC and PTP Simulation Dynamic Reconfiguration Design Example Components 4.2.2.2. 10GE/25GE MAC+PCS with RS-FEC Simulation Dynamic Reconfiguration Design Example Components
4.2.3. Hardware Design Examples x
4.2.3.1. 10GE/25GE MAC+PCS with RS-FEC and PTP Hardware Dynamic Reconfiguration Design Example Components 4.2.3.2. 10GE/25GE MAC+PCS with RS-FEC Hardware Dynamic Reconfiguration Design Example Components
4.3. CPRI Dynamic Reconfiguration Design Examples x
4.3.1. Functional Description 4.3.2. Simulation Design Examples 4.3.3. Hardware Design Examples 4.3.4. CPRI Design Example Interface Signals 4.3.5. CPRI Design Example Registers 4.3.6. Dynamic Reconfiguration Flow for 24G CPRI FEC to 24G CPRI Non-FEC
4.3.1. Functional Description x
4.3.1.1. Clocking Scheme
4.3.2. Simulation Design Examples x
4.3.2.1. 24G CPRI PHY with RS-FEC Simulation Dynamic Reconfiguration Design Example Components 4.3.2.2. 9.8G CPRI PHY Simulation Dynamic Reconfiguration Design Example Components
4.3.3. Hardware Design Examples x
4.3.3.1. CPRI PHY with RS-FEC Hardware Dynamic Reconfiguration Design Example Components
4.4. 25G Ethernet to CPRI Dynamic Reconfiguration Design Example x
4.4.1. Functional Description 4.4.2. Simulation Design Examples 4.4.3. Hardware Design Examples 4.4.4. 25G Ethernet to CPRI Design Example Interface Signals 4.4.5. 25G Ethernet to CPRI Design Examples Registers 4.4.6. Dynamic Reconfiguration Flow for 25GbE PTP FEC to 24G CPRI FEC
4.4.1. Functional Description x
4.4.1.1. Clocking Scheme 4.4.1.2. Reset
4.4.2. Simulation Design Examples x
4.4.2.1. 25GE MAC+PCS with RS-FEC and PTP to CPRI Simulation Dynamic Reconfiguration Design Example Components
4.4.3. Hardware Design Examples x
4.4.3.1. 25GE MAC+PCS with RS-FEC and PTP to CPRI Hardware Dynamic Reconfiguration Design Example Components
4.5. 100G Ethernet Dynamic Reconfiguration Design Example x
4.5.1. Functional Description 4.5.2. Testing the 100G Ethernet Dynamic Reconfiguration Hardware Design Example 4.5.3. Simulation Design Examples 4.5.4. 100GE DR Hardware Design Examples 4.5.5. 100G Ethernet Dynamic Reconfiguration Design Example Interface Signals 4.5.6. 100G Ethernet Dynamic Reconfiguration Examples Registers 4.5.7. Steps to Enable FEC 4.5.8. Steps to Disable FEC
4.5.2. Testing the 100G Ethernet Dynamic Reconfiguration Hardware Design Example x
4.5.2.1. Dynamic Reconfiguration Flow in 100G Ethernet Dynamic Reconfiguration Example Design
4.5.3. Simulation Design Examples x
4.5.3.1. 100GE MAC+PCS with Optional RS-FEC Dynamic Reconfiguration Simulation Design Example 4.5.3.2. Simulating the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example Testbench
4.5.4. 100GE DR Hardware Design Examples x
4.5.4.1. 100GE MAC+PCS with Optional RS-FEC Dynamic Reconfiguration Hardware Design Example Components
4.5.7. Steps to Enable FEC x
4.5.7.1. Configuring for 100G NRZ with RSFEC [KR-FEC (528,514)] 4.5.7.2. Configuring for 100G NRZ with RSFEC [KP-FEC (544,514)] 4.5.7.3. Configuring for 100G PAM4 with RSFEC [KP-FEC (544,514)]
1. About E-tile Hard IP Design Examples
2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example
3. E-tile CPRI PHY Intel® FPGA IP Design Example
4. E-Tile Dynamic Reconfiguration Design Example
5. E-tile Hard IP Intel® Stratix® 10 Design Examples User Guide Archives

2.1.2. Generating the Design

Procedure
Example Design Tab in the E-Tile Hard IP for Ethernet Intel FPGA IP Parameter Editor
If you do not already have an Intel® Quartus® Prime Pro Edition project in which to integrate your E-Tile Hard IP for Ethernet Intel FPGA IP core, you must create one.
  1. In the Intel® Quartus® Prime Pro Edition software, click File > New Project Wizard to create a new Quartus Prime project, or File > Open Project to open an existing Intel® Quartus® Prime project. The wizard prompts you to specify a device.
  2. Specify the device family Intel® Stratix® 10 and select a device that meets all of these requirements:
    • Transceiver tile is E-tile
    • Transceiver speed grade is -1, -2 or -3
    • Core speed grade is -1 or -2
  3. Click Finish.
Follow these steps to generate the E-Tile Hard IP for Ethernet Intel FPGA IP hardware design example and testbench:
  1. In the IP Catalog, locate and select E-Tile Hard IP for Ethernet Intel FPGA IP . The New IP Variation window appears.
  2. Specify a top-level name <your_ip> for your custom IP variation. The parameter editor saves the IP variation settings in a file named <your_ip> .ip.
  3. Click OK. The parameter editor appears.
  4. On the IP, 100GE, or 10GE/25GE tabs, specify the parameters for your IP core variation.
  5. The hardware design examples provide enable internal serial loopback by default.
  6. Change PMA adaptation setting. To change the PMA adaptation setting for the optimal performance, go to PMA Adaptation tab. This step is optional.
    1. Select a PMA adaptation preset for PMA adaptation Select parameter.
    2. Click PMA Adaptation Preload to load the initial and continuous adaptation parameters.
    3. Specify the number of PMA configurations to support when multiple PMA configurations are enabled using Number of PMA configuration parameter.
    4. Select which PMA configuration to load or store using Select a PMA configuration to load or store.
    5. Click Load adaptation from selected PMA configuration to load the selected PMA configuration settings.

    For more information about the PMA adaptation parameters, refer to the E-Tile Transceiver PHY User Guide.

    Note: If you require more information about the PMA adaptation parameters, contact My Intel support.
  7. On the Example Design tab, under Example Design Files, select the Simulation option to generate the testbench and the compilation-only project. Select the Synthesis option to generate the hardware design example. You must select at least one of the Simulation and Synthesis options to generate the design example.
  8. On the Example Design tab, under Generated HDL Format, select Verilog HDL or VHDL. If you select VHDL, you must simulate the testbench with a mixed-language simulator. The device under test in the ex_<datarate> directory is a VHDL model, but the main testbench file is a System Verilog file.
  9. Under Target Development Kit, select the Stratix 10 TX Transceiver Signal Integrity Development Kit-1ST280EY2F55E2VGSI, Stratix 10 TX Transceiver Signal Integrity Development Kit-1ST280EY2F55E2VG or select None. If you select a specific Development Kit as the Target Development Kit, the design example is generated based on a specific device and it overwrites the device you selected in your project file. If you select None as the Target Development Kit, ensure the selected device is your targeted device and adjust the pins assignment in the .qsf file. By default, .qsf file is generated based on the device used in the development kit
  10. Click the Generate Example Design button. The Select Example Design Directory window appears.
  11. If you want to modify the design example directory path or name from the defaults displayed (alt_ehipc3_ 0_example_design), browse to the new path and type the new design example directory name (<design_example_dir>).
Related Information
Level Two Title