PHY Lite for Parallel Interfaces Intel® FPGA IP User Guide

ID 683716
Date 6/21/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.3.2.4. Avalon Configuration Bus Interface Signals

The PHY Lite for Parallel Interfaces Intel® Stratix® 10 FPGA IP exposes the Avalon memory-mapped-MM slave and Avalon memory-mapped master interfaces when you perform dynamic reconfiguration. Connect the Avalon memory-mapped slave to either a master in the core or the master interface of either an PHY Lite for Parallel Interfaces Intel® Stratix® 10 FPGA IP or the External Memory Interface IP to be placed in the same column. You can only connect the master interface to the slave interface of a PHY Lite for Parallel Interfaces Intel® Stratix® 10 FPGA IP or External Memory Interface IP to be placed in the same column.

Table 45.  Avalon Memory-Mapped Master Interface Signals
Signal Name Direction Width Description
avl_clk Input 1

Avalon interface clock.

Maximum Avalon memory-mapped interface clock for PHY Lite for Parallel Interfaces Intel® Stratix® 10 FPGA IP is 167 MHz.

avl_reset_n Input 1 Reset input synchronous to avl_clk.
avl_read Input 1 Read request from io_aux. This signal is synchronous to the avl_clk input.
avl_write Input 1 Write request from io_aux. This signal is synchronous to the avl_clk input.
avl_byteenable Input 4 Controls which bytes should be written on avl_writedata.
avl_address Input

31

Address from io_aux. This signal is synchronous to the avl_clk input.
avl_readdata Output 32 Read data to io_aux. This signal is synchronous to the avl_clk input.
avl_writedata Input 32 Write data from io_aux. This signal is synchronous to the avl_clk input.
avl_readdata_valid Output 1 Indicates that read data has returned.
avl_waitrequest Output 1 Stalls upstream logic when it is asserted.
Table 46.  Avalon Memory-Mapped Slave Interface Signals
Signal Name Direction Width Description
avl_out_clk Output 1 Connect this signal to the input Avalon interface of another PHY Lite for Parallel Interfaces Intel® Stratix® 10 FPGA IP or the External Memory Interfaces IP.
avl_out_reset_n Output 1 Connect this signal to the input Avalon interface of another PHY Lite for Parallel Interfaces Intel® Stratix® 10 FPGA IP or the External Memory Interfaces IP.
avl_out_read Output 1 Indicates read transaction.
avl_out_write Output 1 Indicates write transaction.
avl_out_byteenable Output 4 Controls which bytes should be written on avl_out_writedata.
avl_out_writedata Output 32 The data packet associated with the write transaction.
avl_out_address Output

31

Avalon address (in byte granularity). Value is identical to avl_address but with zeroes padded on the LSBs.
avl_out_readdata Input 32 The data packet associated with avl_out_readdata_valid.
avl_out_readdata_valid Input 1 Indicates that read data has returned.
avl_out_waitrequest Input 1 Stalls upstream logic when it is asserted.