SDI II Intel® FPGA IP User Guide

ID 683133
Date 10/05/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.1.2. Handling Transceiver in Intel® Arria® 10, Intel® Cyclone® 10 GX, and Intel® Stratix® 10 Devices

For Intel® Arria® 10, Intel® Cyclone® 10 GX, and Intel® Stratix® 10 design examples, duplicate another transceiver reconfiguration management generated from the design for additional channels.

The respective Transceiver Native PHY IP cores provide the following SDI presets that you can apply to your design. If you do not use the presets, the Intel® Quartus® Prime software generates your transceiver configurations together with the design example.

Table 31.  SDI Presets in the Transceiver Native PHY Intel Arria 10/Cyclone 10 FPGA IP and L-Tile/H-Tile Transceiver Native PHY Intel® Stratix® 10 IP Cores
Presets Description
SDI 3G NTSC
  • Preset for 3G-SDI single rate (TX and RX) and triple rate TX.
  • Set for SDI data rate factor of 1/1.001.
  • Configured in Duplex mode.

You may change the direction based on your design needs.

SDI 3G PAL
  • Preset for 3G-SDI single rate (TX and RX) and triple rate TX.
  • Set for SDI data rate factor of 1/1.
  • Configured in Duplex mode.

You may change the direction based on your design needs.

SDI HD NTSC
  • Preset for HD-SDI single rate and HD-SDI dual link (TX and RX).
  • Set for SDI data rate factor of 1/1.001.
  • Configured in Duplex mode.

You may change the direction based on your design needs.

SDI HD PAL
  • Preset for HD-SDI single rate and HD-SDI dual link (TX and RX).
  • Set for SDI data rate factor of 1/1.
  • Configured in Duplex mode.

You may change the direction based on your design needs.

SDI Multi rate (up to 12G) Rx
  • Preset for multi rate up to 12G-SDI (RX).
  • Contains multiple profiles for HD-SDI, 3G-SDI, 6G-SDI, and 12G-SDI for dynamic reconfiguration.

If you want to use duplex mode, combine the Tx settings from the SDI Multi rate Tx preset and only profile 0 of the Rx preset. Disable the multiple profiles option. However, if you are using the reconfig files from the design example as the reconfiguration management block, you may need to instantiate the PHY IP core with this preset to generate all 4 reconfig_paramemter_CFG files and add into your design.

SDI Multi rate (up to 12G) Tx
  • Preset for multi rate up to 12G-SDI (TX).
  • Configured in data rate of 11,880 Mbps.
  • Change the data rate to 11,868 Mbps to transmit with data rate factor of 1/1.001.

If you want to use duplex mode, combine the Tx settings from this preset and only profile 0 of the SDI Multi rate Rx preset. Disable the multiple profiles option. However, if you are using the reconfig files from the design example as the reconfiguration management block, you may need to instantiate the PHY IP core with the SDI Multi rate Rx preset to generate all 4 reconfig_paramemter_CFG files and add into your design.

SDI Triple rate Rx
  • Preset for triple rate up to 3G-SDI (RX).
  • Contains multiple profiles for HD-SDI and 3G-SDI for dynamic reconfiguration.

If you want to use duplex mode, combine the Tx settings from the SDI 3G NTSC or SDI 3G PAL preset and only profile 0 of this preset. Disable the multiple profiles option. However, if you are using the reconfig files from the design example as the reconfiguration management block, you may need to instantiate the PHY IP core with this preset to generate all 2 reconfig_paramemter_CFG files and add into your design.