SDI II Intel® FPGA IP User Guide

ID 683133
Date 10/05/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.3.2. SDI II Tx Register Description

Table 34.  STATUS (0x50)
Name Bit(s) Access Description Reset
Reserved 31:1 - - -
Status 0 RO When asserted, the SDI II Tx is producing data. 0x0
Table 35.  VIDEO_MODE_MATCH (0x51)
Name Bit(s) Access Description Reset
Video mode match 31:0 RO Before any user specified mode is matched, this register reads back 0 indicating the default values are selected. Once a match has been made, the register reads back 0x1. 0x0
Table 36.  VIDEO_MODE_BANK_SELECT (0x53)
Name Bit(s) Access Description Reset
Video mode bank selected 31:0 RW Writes to the video mode registers (0x54-0x6D) reflect to the video mode bank selected by this one-hot register. Only 1 mode bank is available. Writes 0x1 to this register to select mode bank 1. 0x0
Table 37.  VIDEO_MODE_CONTROL (0x54)
Name Bit(s) Access Description Reset
Reserved 31:1 - - -
Interlaced 0 RW

Set to 1 for interlaced video.

Set to 0 for progressive video.

0x0
Table 38.  VIDEO_MODE_SAMPLE_COUNT (0x55)
Name Bit(s) Access Description Reset
Reserved 31:16 - - -
Sample Count 15:0 RW Specifies the active picture width of the field. 0x0
Table 39.  VIDEO_MODE_F0_LINE_COUNT (0x56)
Name Bit(s) Access Description Reset
Reserved 31:16 - - -
F0 line count 15:0 RW Specifies the active picture height of progressive video or interlaced video field 0. 0x0
Table 40.  VIDEO_MODE_F1_LINE_COUNT (0x57)
Name Bit(s) Access Description Reset
Reserved 31:16 - - -
F1 line count 15:0 RW Specifies the active picture height of interlaced video field 1. 0x0
Table 41.  VIDEO_MODE_HORIZONTAL_BLANKING (0x5A)
Name Bit(s) Access Description Reset
Reserved 31:16 - - -
Horizontal blanking 15:0 RW Specifies the length of the horizontal blanking length period in samples. 0x0
Table 42.  VIDEO_MODE_VERTICAL_BLANKING (0x5D)
Name Bit(s) Access Description Reset
Reserved 31:16 - - -
Vertical blanking 15:0 RW Specifies the length of the vertical blanking period in lines. For interlaced video, this is the vertical blanking period between the end of field 0 active picture and the start of field 1 active picture 0x0
Table 43.  VIDEO_MODE_F0_VERTICAL_BLANKING (0x60)
Name Bit(s) Access Description Reset
Reserved 31:16 - - -
F0 vertical blanking 15:0 RW Specifies the length of the field 0 vertical blanking period (interlaced video only) in lines. This is the vertical blanking period between the end of field 1 active picture and the start of field 0 active picture. 0x0
Table 44.  VIDEO_MODE_ACTIVE_PICTURE_LINE (0x61)
Name Bit(s) Access Description Reset
Reserved 31:16 - - -
Active picture line 15:0 RW Specifies the line number given to the first line of active picture. 0x0
Table 45.  VIDEO_MODE_F0_VERTICAL_RISING (0x62)
Name Bit(s) Access Description Reset
Reserved 31:16 - - -
F0 vertical rising 15:0 RW Specifies the line number given to the start of field 0’s vertical blanking (after the end of field 0 active picture). 0x0
Table 46.  VIDEO_MODE_FIELD_RISING (0x63)
Name Bit(s) Access Description Reset
Reserved 31:16 - - -
Field rising 15:0 RW Specifies the line number given to the end of field 0 and the start of field 1. 0x0
Table 47.  VIDEO_MODE_FIELD_FALLING (0x64)
Name Bit(s) Access Description Reset
Reserved 31:16 - - -
Field falling 15:0 RW Specifies the line number given to the end of field 1 and the start of field 0. 0x0
Table 48.  VIDEO_MODE_STANDARD (0x65)
Name Bit(s) Access Description Reset
Reserved 31:4 - - -
SDI mode 3 RW Specifies the SDI mode.

0x1: 2081-10-2018 6G-SDI Mode 2.

0x0: 2081-10-2018 6G-SDI Mode 1,

2082-10-2018 12G-SDI Mode 1.

Writing to this register when SDI video standard is 3G-SDI, HD-SDI and SD-SDI has no effect.
0x0
SDI video standard 2:0 RW Specifies the SDI video standard.

0x0: SD-SDI

0x1: HD-SDI

0x2: 3G-SDI Level B

0x3: 3G-SDI Level A

0x4: 6G-SDI Level B

0x5: 6G-SDI Level A

0x7: 12G-SDI Level A
0x0
Table 49.  VIDEO_MODE_VPID_BYTE1 (0x66)
Name Bit(s) Access Description Reset
Reserved 31:8 - - -
SDI video payload ID byte 1 7:0 RW Specifies the video payload byte 1 that to be inserted by the core. 0x0
Table 50.  VIDEO_MODE_VPID_BYTE2 (0x67)
Name Bit(s) Access Description Reset
Reserved 31:8 - - -
SDI video payload ID byte 2 7:0 RW Specifies the video payload byte 2 that to be inserted by the core. 0x0
Table 51.  VIDEO_MODE_VPID_BYTE3 (0x68)
Name Bit(s) Access Description Reset
Reserved 31:8 - - -
SDI video payload ID byte 3 7:0 RW Specifies the video payload byte 3 that to be inserted by the core. 0x0
Table 52.  VIDEO_MODE_VPID_BYTE4 (0x69)
Name Bit(s) Access Description Reset
Reserved 31:8 - - -
SDI video payload ID byte 4 7:0 RW Specifies the video payload byte 4 that to be inserted by the core. 0x0
Table 53.  VIDEO_MODE_VALID (0x6D)
Name Bit(s) Access Description Reset
Reserved 31:1 - - -
Video mode valid 0 WO

Set to 0 before programming the video mode registers (0x54 – 0x69).

Set to 1 to indicate that the video mode registers (0x54 – 0x69) programmed are valid and can be used for video output.
0x0