AN 669: Drive-On-Chip Design Example for Cyclone V Devices

Download PDF
ID 683466
Date 5/15/2022
Public
Document Table of Contents
Document Table of Contents x
1. About the Drive-On-Chip Design Example for Cyclone V Devices 2. Motor Control Boards 3. Drive-On-Chip Design Example for Cyclone V Devices Features 4. Getting Started 5. Building the Design 6. Debugging and Monitoring the Drive-On-Chip Design Example with System Console 7. About the Scaling of Feedback Signals 8. Motor Control Software 9. Functional Description of the Drive-On-Chip Design Example 10. Achieving Timing Closure on a Motor Control Design 11. Design Security Recommendations 12. Reference Documents for the Drive-on-Chip Design Example 13. Document Revision History for AN 669: Drive-on-Chip Reference Design
4. Getting Started x
4.1. Software Requirements for the Drive-On-Chip Design Example for Cyclone V Devices 4.2. Downloading and Installing the Drive-On-Chip Design Example for Cyclone V Devices 4.3. Setting Up the Motor Control Board with your Development Board 4.4. Programming the Hardware onto the Device 4.5. Setting Up Terminal Emulator 4.6. Downloading the HPS Software to the Device
4.6. Downloading the HPS Software to the Device x
4.6.1. Downloading the HPS Software with the Arm GUI 4.6.2. Downloading the HPS Software with the Arm Script
5. Building the Design x
5.1. Compiling the Drive-on-Chip Design Example 5.2. Preparing the µC/OS-II HPS Software Files 5.3. Compiling the µC/OS-II HPS Software 5.4. Creating and Booting an HPS SD Card Software Image 5.5. Creating and Booting a SD Card with both Software Image and Hardware Image
5.3. Compiling the µC/OS-II HPS Software x
5.3.1. Compiling the µC/OS-II HPS Software with the Arm GUI 5.3.2. Compiling the µC/OS-II HPS Software with the Arm Script
6. Debugging and Monitoring the Drive-On-Chip Design Example with System Console x
6.1. System Console GUI Upper Pane for the Drive-On-Chip Design Example 6.2. System Console GUI Lower Pane for the Drive-On-Chip Design Example 6.3. Vibration Suppression Tab 6.4. Controlling the DC-DC Converter 6.5. Tuning the PI Controller Gains 6.6. Controlling the Speed and Position Demonstrations 6.7. Monitoring Performance
6.3. Vibration Suppression Tab x
6.3.1. About the Demonstration 6.3.2. Starting the Demonstration 6.3.3. FFT0 and FFT1 Graphs 6.3.4. Setting Up FFT 6.3.5. Setting Up Command Waveform 6.3.6. Setting Up Second Order IIR Filter
7. About the Scaling of Feedback Signals x
7.1. Signal Sensing in Sigma-Delta ADCs 7.2. Signal Scaling in the Software of the Drive-On-Chip Design Example 7.3. Scale Factors for the Drive-On-Chip Design Example in the System Console Toolkit
8. Motor Control Software x
8.1. Viewing Motor Control Software Help Files 8.2. Software Application Configuration Files 8.3. Defining a New Motor or Encoder Type 8.4. SoC HPS Motor Control Software Project 8.5. Building the HPS Preloader
9. Functional Description of the Drive-On-Chip Design Example x
9.1. Processor Subsystem 9.2. Six-channel PWM Interface 9.3. DC Link Monitor 9.4. Drive System Monitor 9.5. Quadrature Encoder Interface 9.6. Sigma-Delta ADC Interface for Drive Axes 9.7. DC-DC Converter 9.8. Motor Control Modes 9.9. FOC Subsystem 9.10. FFTs 9.11. DEKF Technique for Battery Management 9.12. Signals 9.13. Registers
9.4. Drive System Monitor x
9.4.1. Drive System Monitor States for the Drive-On-Chip Design Example
9.6. Sigma-Delta ADC Interface for Drive Axes x
9.6.1. Offset Adjustment for Sigma-Delta ADC Interface
9.7. DC-DC Converter x
9.7.1. DC-DC Control Simulink Models 9.7.2. Sigma-Delta ADC Interface for DC-DC Converter
9.7.1. DC-DC Control Simulink Models x
9.7.1.1. DC-DC Control Block 9.7.1.2. Generating VHDL for the DSP Builder for Intel FPGAs Models for the DC-DC Converter
9.7.1.1. DC-DC Control Block x
9.7.1.1.1. DC-DC Model and VHDL Entity Signal Names and Data Format
9.9. FOC Subsystem x
9.9.1. DSP Builder for Intel FPGAs Model for the Drive-On-Chip Designs 9.9.2. Avalon Memory-Mapped Interface 9.9.3. About DSP Builder for Intel FPGAs 9.9.4. DSP Builder for Intel FPGAs Folding 9.9.5. DSP Builder for Intel FPGAs Model Resource Usage 9.9.6. DSP Builder for Intel FPGAs Design Guidelines 9.9.7. Generating VHDL for the DSP Builder Models for the Drive-On-Chip Reference Designs
9.10. FFTs x
9.10.1. Servo FFTs 9.10.2. Vibration Suppression 9.10.3. Command Waveform 9.10.4. IIR Filter 9.10.5. IIR Filter Tuning Parameters 9.10.6. IIR Filter Examples 9.10.7. Vibration Detection
9.10.1. Servo FFTs x
9.10.1.1. Running test_servofft.mdl
10. Achieving Timing Closure on a Motor Control Design x
10.1. Optimizing Motor Control Designs
1. About the Drive-On-Chip Design Example for Cyclone V Devices
2. Motor Control Boards
3. Drive-On-Chip Design Example for Cyclone V Devices Features
4. Getting Started
5. Building the Design
6. Debugging and Monitoring the Drive-On-Chip Design Example with System Console
7. About the Scaling of Feedback Signals
8. Motor Control Software
9. Functional Description of the Drive-On-Chip Design Example
10. Achieving Timing Closure on a Motor Control Design
11. Design Security Recommendations
12. Reference Documents for the Drive-on-Chip Design Example
13. Document Revision History for AN 669: Drive-on-Chip Reference Design

6.3.3. FFT0 and FFT1 Graphs

On the Vibration Suppression tab, System Console displays the following graphs:

  • Input signal to FFT0 against time.
  • The magnitude of FFT0 against frequency.
  • Input signal to FFT1 against time.
  • The magnitude of FFT1 against frequency.

The graphs update at the same time as the graphs on the Control and Diagnostics tab whenever the trigger function in that tab activates. Within the SoC, the 4,096pt FFT data recalculates after every 64 new data points. The data sample rate is 16 kHz, thus the FFTs recalculate at 250 Hz.

System Console saves both the time- and frequency-based data to the .csv file that you specify in the Control and Diagnostics tab. You can then verify offline the correctness of the FFT calculation.

The FFT magnitude data is in dB (i.e. 20*log10 absolute value in physical units) similar to a control system Bode plot.

A basic peak detection algorithm enables you to measure particular peaks and develop automated vibration suppression. For each of the two FFTs, the algorithm finds the maximum magnitude value between two specified frequency limits. Thus, you can search for peaks within a physically relevant range without seeing large FFT magnitudes that often occur at low frequencies. System Console shows the peaks with a cross-hair superimposed on the FFT magnitude graph. It shows the frequency and magnitude values below the graph.

Figure 19. Using the Graphs

You can zoom into an area of the graph by clicking and dragging the cursor over that area. To return to the original scaling, right-click on the graph and select Auto Range, Both Axes.'

Level Two Title