Intel Agilex® 7 Configuration User Guide

ID 683673
Date 4/28/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.1.7.4.1. PFL II IP Recommended Design Constraints to FPGA Avalon-ST Pins

Create a pfl_clk clock and a generated AVST_CLK clock

Example below creates a pfl_clk clock running at 50 MHz, supplied by the clk_50m_sysmax input clock.

set pfl_clk_period 20.000
create_clock -name {clk_50m_sysmax} -period $pfl_clk_period [get_ports {clk_50m_sysmax}]
create_generated_clock -name AVST_CLK -source [get_ports {clk_50m_sysmax}] [get_ports {avst_clk}]

Set output delay for PFL II IP output pins

Example below sets the output delay for the AvST_DATA and AvST_VALID pins.

set avst_data_tracemax 0.250
set avst_data_tracemin 0.000
set avst_clk_tracemax 0.250
set avst_clk_tracemin 0.000
set fpga_Tsu 2.100
set fpga_Th 0.100
set fpga_out_max_dly [expr $avst_data_tracemax + $fpga_Tsu - $avst_clk_tracemin]
set fpga_out_min_dly [expr $avst_data_tracemin - $fpga_Th - $avst_clk_tracemax]

set_output_delay -add_delay -max -clock [get_clocks {AVST_CLK}] $fpga_out_max_dly [get_ports {avst_d[*] avst_valid}]
set_output_delay -add_delay -min -clock [get_clocks {AVST_CLK}] $fpga_out_min_dly [get_ports {avst_d[*] avst_valid}]

Setting a false path

You can set the AVST_READY input pin to a false path since this pin is not synchronous to the AVST_CLK clock. The host must synchronize the AVST_READY signal to the AVST_CLK signal using a 2-stage register synchronizer.

set_false_path -from [get_ports {avst_ready}] -to *