Device-Specific Power Delivery Network (PDN) Tool 2.0 User Guide

Download PDF
ID 683293
Date 8/24/2021
Public
Document Table of Contents
Document Table of Contents x
1. Device-Specific Power Delivery Network (PDN) Tool 2.0 User Guide
1. Device-Specific Power Delivery Network (PDN) Tool 2.0 User Guide x
1.1. Overview 1.2. PDN Decoupling Methodology Review 1.3. PDN Tool Setup and Result Optimization 1.4. Device-Specific PDN Tool 2.0 Known Issues and Their Solutions 1.5. Document Revision History for the Device-Specific Power Delivery Network (PDN) Tool 2.0 User Guide
1.2. PDN Decoupling Methodology Review x
1.2.1. PDN Circuit Topology 1.2.2. Major Tabs of the PDN Tool 2.0 1.2.3. Design PCB Decoupling Using the PDN Tool 2.0 1.2.4. Troubleshooting ZEFF
1.2.1. PDN Circuit Topology x
1.2.1.1. ZTARGET 1.2.1.2. FEFFECTIVE
1.2.2. Major Tabs of the PDN Tool 2.0 x
1.2.2.1. System_Decap 1.2.2.2. Stackup 1.2.2.3. BGA_Via 1.2.2.4. Plane_Cap 1.2.2.5. Cap_Mount 1.2.2.6. X2Y_Mount 1.2.2.7. Library 1.2.2.8. Enlarged_Graph
1.2.2.1. System_Decap x
1.2.2.1.1. Device Selection Section 1.2.2.1.2. Power Rail Data and Configuration Section 1.2.2.1.3. Meeting Target Impedance when Entering 0 A into the PDN Tool 1.2.2.1.4. Dealing with Multiple Shared Power Supply Pin Types 1.2.2.1.5. VRM Data Section 1.2.2.1.6. Rail Group Summary Section 1.2.2.1.7. VRM Impedance Section 1.2.2.1.8. BGA Via Section 1.2.2.1.9. Plane Section 1.2.2.1.10. Spreading Section 1.2.2.1.11. Implementing Split Planes 1.2.2.1.12. FEFFECTIVE Section 1.2.2.1.13. Decoupling Section 1.2.2.1.14. Results Summary Section 1.2.2.1.15. Recommended Flow for Deriving Decoupling for an FPGA System using the System_Decap Tab
1.2.2.2. Stackup x
1.2.2.2.1. Stackup Data 1.2.2.2.2. Full Stackup
1.2.2.7. Library x
1.2.2.7.1. Two-Terminal Decoupling Capacitors 1.2.2.7.2. Bulk Capacitors 1.2.2.7.3. X2Y Decoupling Capacitors 1.2.2.7.4. BGA Via and Plane Capacitance 1.2.2.7.5. VRM Library 1.2.2.7.6. Spreading R and L Parasitics 1.2.2.7.7. Dielectric Material Library 1.2.2.7.8. User Set FEFFECTIVE
1.2.3. Design PCB Decoupling Using the PDN Tool 2.0 x
1.2.3.1. Pre-Layout Instructions 1.2.3.2. Deriving Decoupling in a Single-Rail Scenario 1.2.3.3. Deriving Decoupling in the Power-Sharing Scenarios
1.2.4. Troubleshooting ZEFF x
1.2.4.1. Strategies for Correcting a High ZEFF
1.3. PDN Tool Setup and Result Optimization x
1.3.1. Setting Up a PCB Stackup 1.3.2. Setting up a Power Group 1.3.3. Optimizing in Pre-Layout 1.3.4. Further Optimizing for Better Accuracy 1.3.5. Correlation
1.3.1. Setting Up a PCB Stackup x
1.3.1.1. Selecting Your Device 1.3.1.2. Inputting Stackup Data
1.3.1.2. Inputting Stackup Data x
1.3.1.2.1. Using a Custom Dielectric Material
1.3.2. Setting up a Power Group x
1.3.2.1. Selecting the Rails 1.3.2.2. Rail Group Summary 1.3.2.3. VRM Impedance 1.3.2.4. BGA Via 1.3.2.5. Calculating Plane 1.3.2.6. Plane Spreading Parasitics 1.3.2.7. FEFFECTIVE and Decoupling Result Summary
1.3.3. Optimizing in Pre-Layout x
1.3.3.1. Checking the Capacitor Model 1.3.3.2. Optimizing the Decap Count
1. Device-Specific Power Delivery Network (PDN) Tool 2.0 User Guide

1.2.2.2.2. Full Stackup

This section lists the complete stackup of your board. You can modify content in the section to better match your board design. The last column in the section is the PWR plane types. In a single rail analysis case, assign the layer where the power rail is located as target, and the ground layer that the power rail refers to as reference.

Table 4.  Full Stackup Buttons
Button Label Description
Construct Stackup Populates the Full Stackup section to the number of layers defined in the Stackup Data section.
Import Geometries Updates geometry parameters in the BGA_Via, Plane_Cap, Cap_Mount, and X2Y_Mount tabs using your input from the Stackup Data section. The tool also checks that the PWR Planes column in the Full Stackup section has only one target layer, and provides a warning for this error.
Proceed to System Decap Opens the System_Decap tab.
Level Two Title