External Memory Interfaces Intel® Stratix® 10 FPGA IP User Guide

ID 683741
Date 3/11/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

9.1.3. Intel Stratix 10 EMIF IP QDR-IV Parameters: Memory

Table 299.  Group: Memory / Topology
Display Name Description
DQ width per device Specifies number of DQ pins per port per QDR IV device. Available widths for DQ are x18 and x36. (Identifier: MEM_QDR4_DQ_PER_PORT_PER_DEVICE)
Enable width expansion Indicates whether to combine two memory devices to double the data bus width. With two devices, the interface supports a width expansion configuration up to 72-bits. For width expansion configuration, the address and control signals are routed to 2 devices. (Identifier: MEM_QDR4_WIDTH_EXPANDED)
Address width Number of address pins. (Identifier: MEM_QDR4_ADDR_WIDTH)
Memory Type The QDR-IV family includes two members:

MEM_XP: QDR-IV Xtreme Performance (XP) with a Maximum Clock Frequency of 1066MHz

MEM_HP: QDR-IV High Performance (HP) with a Maximum Clock Frequency of 667MHz.

(Identifier: MEM_QDR4_MEM_TYPE_ENUM)
Table 300.  Group: Memory / Configuration Register Settings
Display Name Description
Address bus inversion Enable address bus inversion. AINV are all active high at memory device. (Identifier: MEM_QDR4_ADDR_INV_ENA)
Data bus inversion Enable data bus inversion for DQ pins. DINVA[1:0] and DINVB[1:0] are all active high. When set to 1, the corresponding bus is inverted at memory device. If the data inversion feature is programmed to be OFF, then the DINVA/DINVB output bits will always be driven to 0. (Identifier: MEM_QDR4_DATA_INV_ENA)
Use address parity bit Indicates whether to use an extra address parity bit and enable address parity error detection. (Identifier: MEM_QDR4_USE_ADDR_PARITY)
ODT (Clock) Determines the configuration register setting that controls the clock ODT setting. (Identifier: MEM_QDR4_CK_ODT_MODE_ENUM)
ODT (Address/Command) Determines the configuration register setting that controls the address/command ODT setting. (Identifier: MEM_QDR4_AC_ODT_MODE_ENUM)
ODT (Data) Determines the configuration register setting that controls the data ODT setting. (Identifier: MEM_QDR4_DATA_ODT_MODE_ENUM)
Output drive (pull-up) Determines the configuration register setting that controls the pull-up output drive setting. (Identifier: MEM_QDR4_PU_OUTPUT_DRIVE_MODE_ENUM)
Output drive (pull-down) Determines the configuration register setting that controls the pull-down output drive setting. (Identifier: MEM_QDR4_PD_OUTPUT_DRIVE_MODE_ENUM)