External Memory Interfaces Intel® Stratix® 10 FPGA IP User Guide

ID 683741
Date 3/11/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.1.1.1. local_reset_req for DDR3

Local reset request. Output signal from local_reset_combiner

Table 12.  Interface: local_reset_reqInterface type: Conduit
Port Name Direction Description
local_reset_req Input Signal from user logic to request the memory interface to be reset and recalibrated. Reset request is sent by transitioning the local_reset_req signal from low to high, then keeping the signal at the high state for a minimum of 2 EMIF core clock cycles, then transitioning the signal from high to low. local_reset_req is asynchronous in that there is no setup/hold timing to meet, but it must meet the minimum pulse width requirement of 2 EMIF core clock cycles.