Intel Agilex® 7 Clocking and PLL User Guide: F-Series and I-Series

ID 683761
Date 7/13/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.2.1. PLL Features

Table 2.  PLL Features in F-Series and I-Series Devices—Preliminary
Feature I/O Bank I/O PLL Fabric-Feeding I/O PLL
Integer PLL Yes Yes
Number of C output counter 7 3
M counter divide factor range 4 to 160 4 to 160
N counter divide factor range 1 to 110 1 to 110
C counter divide factor range 1 to 512 1 to 512
Dedicated external clock outputs 2 Yes
Dedicated clock input pins3 Yes Yes
External feedback input pin Yes
Source synchronous compensation 4 Yes Yes
Direct compensation Yes Yes
Normal compensation 4 Yes Yes
Zero-delay buffer compensation Yes
External feedback compensation Yes
LVDS compensation Yes
Voltage-controlled oscillator (VCO) output drives the DPA clock Yes
Phase shift resolution 5 78.125 ps 78.125 ps
Programmable duty cycle Yes Yes
Power down mode Yes Yes
Bandwidth setting Low, medium, and high Medium and high
Spread-spectrum input clock tracking 6 Yes Yes
Table 3.  Spread-Spectrum Input Clocking Supported Profile
Spread-Spectrum Clocking Parameter Setting
Modulation frequency 200 kHz
Center or down spread Down spread
Frequency deviation ±1%
Modulation profile Triangle
2 For dedicated external clock outputs, you must enable access to external clock output port through IOPLL Intel® FPGA IP core. There are 2 dedicated external clock output available for each I/O bank I/O PLL.
3 I/O PLL only supports True Differential Signaling for dedicated clock input pins.
4 Non-dedicated feedback path option is available for this compensation mode.
5 The smallest phase shift is determined by the VCO period divided by eight. For degree increments, the F-Series and I-Series devices can shift all output frequencies in increments of at least 45°. Smaller degree increments are possible depending on the frequency and divide parameters.
6 Provided that input clock jitter is within the input jitter tolerance specifications. Intel recommends that the spread-spectrum support profile is down spread, ±0.5% and Fmod = 200 kHz.