Video and Vision Processing Suite Intel® FPGA IP User Guide

ID 683329
Date 4/01/2024
Public
Document Table of Contents
1. About the Video and Vision Processing Suite 2. Getting Started with the Video and Vision Processing IPs 3. Video and Vision Processing IPs Functional Description 4. Video and Vision Processing IP Interfaces 5. Video and Vision Processing IP Registers 6. Video and Vision Processing IPs Software Programming Model 7. Protocol Converter Intel® FPGA IP 8. 1D LUT Intel® FPGA IP 9. 3D LUT Intel® FPGA IP 10. AXI-Stream Broadcaster Intel® FPGA IP 11. Bits per Color Sample Adapter Intel FPGA IP 12. Black Level Correction Intel® FPGA IP 13. Black Level Statistics Intel® FPGA IP 14. Chroma Key Intel® FPGA IP 15. Chroma Resampler Intel® FPGA IP 16. Clipper Intel® FPGA IP 17. Clocked Video Input Intel® FPGA IP 18. Clocked Video to Full-Raster Converter Intel® FPGA IP 19. Clocked Video Output Intel® FPGA IP 20. Color Plane Manager Intel® FPGA IP 21. Color Space Converter Intel® FPGA IP 22. Defective Pixel Correction Intel® FPGA IP 23. Deinterlacer Intel® FPGA IP 24. Demosaic Intel® FPGA IP 25. FIR Filter Intel® FPGA IP 26. Frame Cleaner Intel® FPGA IP 27. Full-Raster to Clocked Video Converter Intel® FPGA IP 28. Full-Raster to Streaming Converter Intel® FPGA IP 29. Genlock Controller Intel® FPGA IP 30. Generic Crosspoint Intel® FPGA IP 31. Genlock Signal Router Intel® FPGA IP 32. Guard Bands Intel® FPGA IP 33. Histogram Statistics Intel® FPGA IP 34. Interlacer Intel® FPGA IP 35. Mixer Intel® FPGA IP 36. Pixels in Parallel Converter Intel® FPGA IP 37. Scaler Intel® FPGA IP 38. Stream Cleaner Intel® FPGA IP 39. Switch Intel® FPGA IP 40. Tone Mapping Operator Intel® FPGA IP 41. Test Pattern Generator Intel® FPGA IP 42. Unsharp Mask Intel® FPGA IP 43. Video and Vision Monitor Intel FPGA IP 44. Video Frame Buffer Intel® FPGA IP 45. Video Frame Reader Intel FPGA IP 46. Video Frame Writer Intel FPGA IP 47. Video Streaming FIFO Intel® FPGA IP 48. Video Timing Generator Intel® FPGA IP 49. Vignette Correction Intel® FPGA IP 50. Warp Intel® FPGA IP 51. White Balance Correction Intel® FPGA IP 52. White Balance Statistics Intel® FPGA IP 53. Design Security 54. Document Revision History for Video and Vision Processing Suite User Guide

11.1. About the Bits per Color Sample Adapter IP

The Intel FPGA Streaming Video protocol requires you to configure each interface for a maximum number of bits to represent each color sample. This setting determines the width of the tdata bus. The Bits per Color Sample Adapter IP allows you to connect two interfaces with different settings for bits per color sample.

When the input bits per color sample is less than the output bits per color sample, the IP adds the required number of bits at the LSB end of the tdata bus. The IP fixes these additional bits to 0. When the input bits per color sample is greater than the output bits per color sample, the IP clips the required number of bits from the LSB end of each color sample.

When you configure the IP for use with the lite variant of the Intel FPGA Streaming Video interface protocol, it consumes no FPGA resources as the clip and pad operations do not require any. However, when you configure the IP for use with the full variant of the protocol, a small amount of additional logic is required to ensure that the clip and pad operations do not affect the data in the nonvideo packets. The full variant of the protocol includes image information packets, and these packets contain a field indicating how many of the bits in each color plane are active for the current video stream.

When using the full variant of the protocol, you can include an Avalon Memory-mapped agent control interface to control the output bits per color field value at runtime via the register map. If you do not turn on Memory mapped control interface, the IP uses the default value for the bits per color field. When converting from a lower input bits per color sample value at the input to a higher value at the output, the IP does not modify this field as the pixel data does not change. However, when converting from a higher input bits per color sample value to a lower output bits per color sample value, you must modify the active bits per color sample field if it indicates a value greater than the maximum bits per color supported at the output.