External Memory Interfaces Intel® Stratix® 10 FPGA IP User Guide

ID 683741
Date 9/26/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

6.5.1.3. On-Chip Termination Recommendations for Intel® Stratix® 10 Devices

  • A value of 34 to 40 ohms is a good starting point for output mode drive strength.
  • Input mode (parallel termination) for Data and Data Strobe signals: A value of 40 or 60 ohms is a good starting point for FPGA side input termination.