External Memory Interfaces Intel® Stratix® 10 FPGA IP User Guide

ID 683741
Date 9/26/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

13.4.1. Signals to Monitor with the Signal Tap II Logic Analyzer

This topic lists the memory controller signals you should consider analyzing for different memory interfaces. This list is not exhaustive, but is a starting point.

Monitor the following signals:

  • amm_addr
  • amm_rdata
  • amm_rdata_valid
  • amm_read_req
  • amm_ready
  • amm_wdata
  • amm_write_req
  • fail
  • pass
  • afi_cal_fail
  • afi_cal_success
  • test_complete
  • be_reg (QDRII only)
  • pnf_per_bit
  • rdata_reg
  • rdata_valid_reg
  • data_out
  • data_in
  • written_data_fifo|data_out
  • usequencer|state *
  • usequencer|phy_seq_rdata_valid
  • usequencer|phy_seq_read_fifo_q
  • usequencer|phy_read_increment_vfifo *
  • usequencer|phy_read_latency_counter
  • uread_datapath|afi_rdata_en
  • uread_datapath|afi_rdata_valid
  • uread_datapath|ddio_phy_dq
  • qvld_wr_address *
  • qvld_rd_address *