Cyclone® V Hard Processor System Technical Reference Manual

ID 683126
Date 8/28/2023
Public
Document Table of Contents

28.2.2. Reset Interfaces

You can enable the resets on an individual basis through the FPGA Interfaces tab under the Resets section.

Table 224.  Reset Parameters

Parameter Name

Parameter Description

Interface Name

Enable HPS-to-FPGA cold reset output

Enable interface for HPS-to-FPGA cold reset output

h2f_cold_reset

Enable HPS warm reset handshake signals

Enable an additional pair of reset handshake signals allowing soft logic to notify the HPS when it is safe to initiate a warm reset in the FPGA fabric.

h2f_warm_reset_handshake

Enable FPGA-to-HPS debug reset request

Enable interface for FPGA-to-HPS debug reset request

f2h_debug_reset_req

Enable FPGA-to-HPS warm reset request

Enable interface for FPGA-to-HPS warm reset request

f2h_warm_reset_req

Enable FPGA-to-HPS cold reset request

Enable interface for FPGA-to-HPS cold reset request

f2h_cold_reset_req