Arria V Hard Processor System Technical Reference Manual

ID 683011
Date 12/02/2022
Public
Document Table of Contents

A.4.7. L4 Watchdog 0 Timer

The boot ROM enables the L4 Watchdog 0 Timer early in the boot process.

This watchdog is reserved for the boot ROM until the preloader indicates that it has started correctly and taken control of the exception vectors. The timeout is at least one second, depending on the clock select setting. Because the watchdog is reset just before the control passes to preloader, the preloader must reset the watchdog when it begins execution.

The L4 watchdog 0 timer is reserved for boot ROM use. While booting, if a watchdog reset happens before software control passes to the preloader, the boot ROM code attempts to load the last valid preloader image, identified by the initswlastld register in the System Manager.

If the watchdog reset happens after the preloader has started executing but before it writes a valid value to initswstate register, the boot ROM increments initswlastld and attempts to load that image. If the watchdog reset happens after the preloader writes a valid value to initswstate register, the boot ROM code attempts to load the image indicated by initswlastld register.