External Memory Interfaces Intel® Arria® 10 FPGA IP User Guide

ID 683106
Date 12/19/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

12.1.1.2.3. Address and Command

Address and command signals are single data rate signals latched by the memory device using the FPGA output clock; some are half-rate data signals, while others, such as the chip select, are full-rate signals.

The Timing Analyzer analyzes the address and command timing paths through conventional static timing analysis and further processing steps that account for memory pessimism removal (as shown in the following figure). Depending on the memory protocol in use, if address command calibration is performed, calibration uncertainty is subtracted from the timing window while PVT variation and skew effects are not subtracted, and vice versa.

Figure 100. Address and Command Timing Analysis

Address and Command Timing Analysis