External Memory Interfaces Intel® Arria® 10 FPGA IP User Guide

ID 683106
Date 12/19/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

14.7.1.3. Setup and Use

Before using the EMIF Toolkit, you should compile your design and program the target device with the resulting SRAM Object File (. sof). For designs compiled in the Intel® Quartus® Prime software, all debugging information resides in the .sof file.

You can run the toolkit using all your project files, or using only the Intel® Quartus® Prime Project File (.qpf), Intel® Quartus® Prime Settings File (.qsf), and .sof file.

After you have programmed the target device, you can run the EMIF Toolkit and open your project. You can then use the toolkit to create connections to the external memory interface.